Babcock-Davis - Always right there.

	Fire-Rated B-FCRM/FCCM: Aluminum

	Gutter Frame B-FGA: Aluminum B-FGP: Steel

	Angle Frame B-FHA: Aluminum B-FHP: Steel

	Recessed B-FTA: Aluminum B-FTP: Steel

B-FGP |


Single Door (shown in aluminum) Double Door (shown in aluminum)	Babcock-Davis B-FGP Series gutter frame steel floor doors are intended for exterior or high moisture areas when liquid flow into the hatch is a concern. The frame is constructed with a gutter for water runoff to a drainage system. Our hatches come standard with counterbalancing springs and a slam latch for ease of use. All Babcock-Davis floor doors have stainless steel hardware throughout.

Product Characteristics
B-FGP SERIES
Door: 3/16" steel diamond-pattern tread plate.
Frame: 3/16" structural steel gutter frame- a 1-1/2" drainage coupling is provided to allow for water run-off.
Hinge: Stainless steel butt hinge.
Latch: Stainless steel slam latch with an inside lever handle and an outside removable key handle.
Finish: Phosphate dipped and prime coated.
Spring: Stainless steel compression springs enclosed in tubes, which counterbalance the door to require no more than 10-30 lbs of opening force.
Hold-open arm: Stainless steel handle that automatically locks the door at 90 degrees when opened. Handle can be released with one hand for easy operation.
Standard load capacity: 300 psf, Optional: H-20 load capacity.


B-FGP Single Door Section


B-FGP Double Door Section

D:\Sites\LocalUser\babcock-davis\content\0065.htm